|Numéro de l'article:||11.0545|
|Disponibilité:||En stock (2)|
This robust die cast aluminium housed digital auto inflator is simple to use with plug and play design, all the customer needs to do it pre-set the required pressure, place the chuck on the tyre valve and the built-in auto start inflates/deflates the tyre to the specified pressure. This inflator has three functions:
1. Standard inflate/deflate (auto)
2. Over pressure for tyre shops; where new tyres are fitting and you need to ensure that the tyre inflates to a pressure where the tyre seats properly on the rim then deflates automatically to the required pre-set pressure
3. Flat tyre; where there is no residual tyre pressure in the tyre the inflator does not automatically start so a manual override is required to fill flat tyres.
Built tough to last this unit is IP56 rated so it can withstand the elements inside and out, it has mechanical anti-vandal buttons and a loud audible warning that can be heard in the noisiest areas when the correct tyre pressure has been reached.
Reader unit: Digital display, audible warning
Chuck type: Clip on
Chuck style: Single straight
Scale: 1200 kPa, 174 p.s.i., 12 bar, 0-12 kg/cm²
Inlet size: 1/4 " BSP female
Hose length: 7.5m
Dimensions: 230 L x 278 W x 85 H mm
Accuracy: ± 0.3 p.s.i. @ 25-75 p.s.i.
Operation: Auto inflate, deflate
Supply pressure max: 182 p.s.i.
Advised application: Forecourt, industrial, workshops
Supply voltage: 240 V AC (50-60 Hz) Wattage: 12 W max
Working temperature: -10 +50º C
Humidity range: Up to 95% RH non condensing
Inflation flow: 3000 L/min @ 182 p.s.i.